0
ASSIMILATOR KONNEKT
E
n
g
l
i
s
h
AnAlysis DisPlAy
On the A and B views, the display shows the frequency of the reference analysis curve,
target analysis curve and the interpolated Eq curve. The Analysis display will appear
differently when the Morph view is active. For details, refer to the Morph section at the
end of the manual.
Blue
Indicates the reference analysis curve
green Indicates the target analysis curve
Black
Indicates the real time Analysis of the signal after processing.
Red
Indicates the amount of the Eq curve that is applied to the target. At zero,
when there is no application of the Eq curve to the target, the red application
curve will be flat.
DisPlAy OPTiOns
By selecting the Display Options, you can enable and disable any of the curves from
being visible in the display. Disabling a curve from the display will nOT deactivate the
curve. Only the metering will be hidden.
inPUT gAin AnD mETER
The Input gain fader and meter manage the input signal to the ASSIMILATOR.
The clip indicators at the top of the meters should never be active. If the clip
indicators are active, reduce the Input gain fader until no clips are indicated on the
input clip LEDs.
OUTPUT gAin AnD mETER
This is a standard gain fader and meter – measured in dB – that indicates the output
gain stage of the Plug-In. The clip indicators at the top of the meters should never be
active. If the clip indicators are active, reduce the Output gain fader setting or adjust
the gain calibration (described later in this manual) until no clips are indicated on the
Output clip LEDs.
APPly
This fader will apply the reference analysis curve – indicated by the blue curve – to the
target audio. When Apply is set to 0%, the “apply curve” – indicated by the red curve
– will be flat. As the Apply fader is increased, the red curve will change to indicate
the Eq interpolated between the target and reference curves. At 100%, there will be a
100% interpolation of the Eq.
