7
Personal safety
Use safety equipment. Always wear eye protection. Using safety equipment such as a
dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed
will reduce the risk of personal injury.
Avoid accidental starts. Ensure the switch is in the off position before inserting the plug.
Carrying power tools with your finger on the switch or plugging in power tools when the
switch is in the on position makes accidents more likely.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from the power tool. Loose clothes, jewellery or long hair can become
entangled in the moving parts.
Service
Your power tool should be serviced by a qualified specialist using only standard spare parts. This
will ensure that it meets the required safety standards.
Specific safety instructions for rotary hammer
Always use the auxiliary handle for maximum control.
Check if the maximum speed and size indicated on the grinding wheel grinder corresponds
to the manufacturer’s specifications.
Before use, check that the grinding wheel is not damaged. Do not use abrasive wheels
cracked, broken or damaged.
Make sure that the grinding wheel was fitted and secured properly. Do not use washers
reducers or adapters to make the grinding wheel fixing properly.
Angle grinder is double insulated. This means it has two completely independent types of
insulation that prevents the operator to enter into direct contact with the metal parts of the
cables. This measure is a high degree of protection against electrocution.
Application
Angle grinder is intended for personal use for grinding and polishing metals and stone. In
combination with the correct accessories, the device can be used for brushing and sanding.
IT IS NOT DESIGNED FOR PROFFESIONAL USE.
Description
1. Spindle lock button
2. ON/OFF switch
3. Continuous mode switch
4. Side handle
5. Wheel guard with quick fastening system
6. Grinding wheel (not included)