Continuation of radio setup
●
Units
- Metric and imperial units for telemetry
values
●
Play delay
- Delays playing sounds associated
with the mid-position of 3-position switches
●
USB mode
- Set which mode to use when
USB-C cable is connected
●
Rx channel order
- Determines the order in
which the four primary controls (Rudder,
Elevator, Aileron, and Throttle) are inserted on
channels 1-4 when creating a new model
●
Mode
- Determines which sticks move which
controls on the airplane
Memory card
Browse and look up the contents of the SD-card
●
Use the
Rocker-wheel
and
Enter-button
to
browse
●
You can update the SD card contents by
connecting the USB and selecting the SD card
operation mode. The SD card will be
recognized as PC drive. For the latest SD card
contents, visit the OpenTX website.
Global functions
This is the place where switches can be used to trigger
special functions such as trainer mode, soundtrack
playback, speech output of variables etc.
●
Global functions are special functions that are
applied across all planes.
13
