16 |
P a g e
G e n e r a l D a t a H e a l t h c a r e , I n c .
4
5
6
Electrical Connection
Check to make sure that the voltage available at your facility complies with the
requirements of this unit.
Connect the unit using the power cable provided. It is critical to connect to a
grounded socket.
Before changing a fuse, make sure to disconnect power from the unit.
1.
Insert the
fuse
(6) into the
fuse holder
(5) as it is showed
in the
picture and the insert the fuse holder into the
socket
(4).
2.
Energize the instrument with the switch at the rear
right side. The instrument should initialize.
3.
After the microtome is energized, the display field
in
the control panel and hand pad will illuminate. The
specimen holder will automatically retract back to
zero. This is indicated by a beep.
