(C) tb-software 2018
Page 5 of 6
5.7 Over-sampling
Incoming signal could be over-sampled up to 16 times. As
SLM2
uses highest quality
up/down-sampling algorithms for
low aliasing
operation significantly more CPU resources
are used.
5.8 Look-Ahead
"Look-Ahead" controls the length of the time window of the signal analysis. Longer time
window ensures less sound degradation.
Short/long, default short.
5.9 Limiter Mode
"Norm" is the standard limiter mode, while “Smooth” enables extra anti-clipping function.
Norm/smooth, default norm.
5.10 Drive Clipper
SLM2
has a second gain stage with a clipper. It can be used to increase loudness even further.
0 - +24 dB, default 0.0 dB
5.11 Channel Link
If set to 100 % the gain reduction is calculated from highest peak of both stereo channels, set
to 0 % both channels are processed fully independent.
0 - 100 %, default 100 %
5.12 Ceiling
Ceiling sets the maximum level output signal can reach.
-24 - 0 dBFS, default 0.0 dB
5.13 Meters
Meters for input signal (L/R Input), output signal (L/R Output) and gain reduction (L/R GR).
