TBProAudio CS-5501 V2, Руководство пользователя

Страница: 9 / 30

(C) TBProaudio 2022 Page 9 of 30
5.2.6 Monitor mode
Set the monitor mode either to in-place or centred.
5.2.7 Bypass
Global plugin by-pass.
5.3 Clip protection & OS
5.3.1 Clip protection
Toggles clip protection. If enabled signal is clipped at ceiling level, in dBFS.
The red LED lights if signal is above ceiling level, regardless if clip protected is
enabled or not. The clip module can be positioned either post or pre fader.
Please refer to chapter 5.15.
5.3.2 Over sampling
Incoming signal could be over-sampled up to 2 or 4 times. Over sampling reduces
magnitude/phase distortions near Nyquist frequency and let the filter sound much
more "analogue".
5.4 Fader section
5.4.1 Input/output fader
CS-5501 provides independent left/right faders for incoming and
outgoing signal. Double click on the fader handle enables direct
value input.
5.4.2 Input phase
This control lets you invert the phase of incoming left and right signal
5.4.3 Link input/output fader
Toggles linkage of left and right input/output fader.