86
87
Guide of Main Menu
1.6. A/V Output Setting
1. TV Type:
Select the TV types.(PAL/NTSC/Auto) In Auto mode, the STB is automatically selected as
NTSC or PAL according to the service played.
2. TV Aspect Ratio:
Select the aspect ratio of TV which is connected to STB.(4:3/16:9)
- Display Format: Select the format which the video is to be displayed on screen. (Letter Box/Pan Scan)
In case of 16:9 mode, this option is not available.
3. Video Output Mode:
When you use a SCART cable to watch TV, you can select the video output
mode. (CVBS or RGB)
4. Sound Mode:
Set the audio mode which is output from the RCA jack.(Stereo/Mono/Left/Right)
5. Picture Adjust:
Adjust brightness, contrast and color of screen.
2. INSTALLATION
2.1. Dish Setting
Select the antenna and LNB settings for service search. The values that are set in this menu will be
available for selection in other service searching menus.
1. Satellite:
Select the satellite what you want to search the service.
- Press the LEFT/RIGHT button to select the satellite.
- Select the wanted satellite name.
- If the desired satellite name is not listed then select User Defined.
2. Frequency:
Select frequency what you want to check the signal.
3. LNB Power:
Select the LNB power.
4. LNB Type:
Select the LNB type.
5. LNB Frequency:
Select the L.O. frequency that is set to antenna.
- Use the LEFT/RIGHT buttons to select the LNB frequency.
- If the required LNB frequency is not listed, then enter the frequency manually using the NUMERIC
buttons.
