7
Installation
1. Open the dome by turning the dome cover ring from the dome base fitting.
2. There are two mounting holes on the dome base so that users can install
the unit in any place such as ceiling, wall and etc.
3. Use two mounting screws (PH 3.5 x 20) to affix the dome base to a sturdy
surface.
Do not aim the camera directly into the sun.
Caution!
8
Connection
-
Power connections: Requires DC12V.
-
All camera models are supplied with second video output on the
camera module. To use this feature along with a service monitor,
second monitor cable/connector is needed.
