6. Connection
1) P
C connection
Connect LCD monitor to the PC, you can enjoy a more realistic picture and
clear sound.
●
Make sure the power of LCD monitor and PC have been shut down.
●
Connect the VGA output of the PC to the VGA jack on the set.
●
Connect the PC audio output to audio input jack on the set.
●
Connect the power cord.
●
Power on the LCD monitor and then PC.
●
Select the VGA mode via the remote controller.
●
The LCD monitor can support the resolution shows on sheet 1, other
resolution can not support. 1280×1024 is suggested.
2)
)
AV INPUT and AV OUTPUT connection
●
Connect the BNC in cable output of the DVR to the AV input on the set.
●
Connect the BNC out cable input of the other monitor to the VIDEO OUTPUT
on the set.
●
Select AV1 or AV2 input source with pressing the AV button on the remote
controller.
3)
HDMI connection
HDMI (High Definition Multimedia Interface) is the first all digital consumer
electronics A/V interface that supports uncompressed standard. One jacksupports
both video and audio information.
●
Make sure the power of LCD monitor and DVR have been shut down.
●
Connect HDMI output of the DVR to the HDMI input jack on the set.
●
Connect the power cord.
●
Power on the LCD monitor and then DVR
●
Select the HDMI mode via the remote controller
7. Basic OSD setup
●
Press the “MENU” button into main menu.
●
Press “UP, DOWM, LEFT, RIGHT” button select OSD menu.
●
Press “RIGHT” button to enter, please refer the following sheet.
●
Following OSD menu are the ones which have video signal input.
-6-