BRIEF OF PRODUCT
*
Sensor
(
CCD
)
Adopt 1/2.9
"
COMS Sensor.
*
Auto Gain Control (AGC)
Built-in auto gain control
(AGC)
circuit. The color camera
can get high definition picture in low Lux condition.
*
Scanning Mode
NTSC or PAL mode.
*
Water Resistance
IP66.
*
OSD SETTING
CONNECTING
Switch to AHD / CVBS / CVI / TVI mode
.
Press "UP" bu on for 5S to CVI mode
.
Press "DOWN" bu on for 5S to TVI Mode.
. Press "L" bu on for 5S to CVBS Mode.
. Press "R" bu on for 5S to AHD Mode.
. Press bu on for 5S to change the PAL/NTSC system.
. Press bu on to enter into the OSD menu
TROUBLE AND SOLUTION
1. No Picture after providing power
. May be the power supply voltage abnormity, please check the
power supply voltage and pole whether exactitude.
. Please check all the connecting cable and monitors whether be
connected correctly or not.
2. The picture level direction have flowing interference ripples
. May be caused by the power supply AC ripples, it need filter the wave of
the power supply.
. Check the monitor and peripheral equipments used.
3. The picture background color changes continuously
. The fluorescent lamp’s electromagnetic field cause color roll. This is
proper phenomenon of the cameras.
. Reduce the fluorescent lamp numbers or increase the distance between
the camera and the fluorescent lamps can improve it.
. Use power supply external sync. camera can solve it.
4. The picture smear too mass
. The power supply’s voltage unstable.
. Connecting cables not connect correctly or have high impedance.
NOTES
The power supply must through safe attestation.
Its output voltage, current, voltage polarity and
operating temperature must match the camera’s
requirement.
When using the camera in the thunderbolt
condition,please note to mount Anti-thunder device
or put off the power supply plug and cable.
Do not attempt to disassemble the camera. If the
camera can not work, please contact local
franchiser or our company.
Camera HD 1080P
T
V I IO
n
T
V I IO
n
Camera HD 1080P
T
V I IO
n
Camera HD 1080P
LENS
MANUAL
DC
MODE/IRIS SPEED
AGC:0-
15
BRIGHTNESS
EXPOSURE
D-WDR
ON/AUTO/OFF
LEVEL
DEFOG
AUTO/OFF
POSE/SIZE/GRAADTION/
DEFAULT
BLC
LEVEL/AREA/DEFAULT
SELECT
AREA1~AREA4
BACKLIG HT
HSBLC
LEVEL
ALL DAY
MODE
NIGHT
AGC LEVEL
WHITE BAL
ATW/AWC→SET/INDOOR/OUTDOOR/MANUAL/AWB
EXT
D→N(DELAY):0
OSD SET
N→D(DELAY):0
DAY&NIG HT
AUTO
D→N(AGC):1-255
N→D(AGC):1-255
B/W
BURST/IR SMART/IR PWM
NR
2DNR
MIDDLE/HIGH/OFF/LOW
3DNR
MIDDLE/HIGH/OFF/LOW
CAM TITLE
OFF/ON
FREEZE
OFF/ON
SPECIAL
D-EFFECT
MIRROR
MIRROR/V FLIP/ROTATE/OFF
NEG.IMAGE
OFF/ON
LANGUAGE
ENG/CHN1/CHN2/GER/FRA/ITA/SPA/POL/RUS/
POR/NED/TUR
SHARPNESS AUTO
LEVEL/START AGC/END
ADJUST
AGCRETU
VIDEO.OUT
PAL/NTSC
EXIT
SAVE&END/RESET/NOT SAVE
Monitor
JOYSTICK
UP
MENU
R
L
DOWN
PRESS
TBK-BUL4745EIR
Video
DC
12V
Link wire rule:
Video
Power
GND
Video
-
+
DC
12V Power Supply