TBK vision TBK-6004CHZ, Руководство пользователя

Страница: 28 / 64

27
WB_CNT: This is an index counter to change the mode of White Balance
1. In case of WB_CNT = 0, the mode of White Balance becomes “AUTO” mode.
2. In case of WB_CNT = 1, the mode of White Balance becomes “HUE” mode.
3. In case of WB_CNT = 2, the mode of White Balance becomes “INDOOR” mode.
4. In case of WB_CNT = 3, the mode of White Balance becomes “OUTDOOR” mode.
5. In case of WB_CNT = 4, the mode of White Balance becomes “MANUAL” mode.
6. In case of WB_CNT = 5, the mode of White Balance becomes “PUSH AUTO” mode.
7. In case of WB_CNT = every other value, the mode of White Balance remains unchanged.
Camera ID Display Mode ON/OFF Toggle control
Switch the display mode of camera ID (ON/OFF).
PC
→
Camera
0xC5 0xAA 0x6A 0x00 CAM_ID C.S.
Camera
→
PC
0xC5 0xAA 0x6A 0x00 0x6A 0xXX 0xXX 0xXX C.S.
Caution: If the Camera ID is “OFF” mode, then the Camera ID is not displayed.
Zoom Lens Position Read
Read the current position value of Zoom lens & Digital Zoom MAG data.
PC
→
Camera
0xC5 0x36 0x00 0x00 CAM_ID C.S.
Camera
→
PC
0xC5 0x36 0x00 0x00 1 ZP_CNT V_MAG 0xXX C.S.
1. 1: Upper byte of Zoom lens position.
2. ZP_CNT: Lower byte of Zoom lens position.
3. V_MAG: Digital zoom data.
Ex. In case of Zoom lens Position = 0x12A & Digital zoom data = 0x10,
a. 1 = 0x01
b. ZP_CNT = 0x2A
c. V_MAG = 0x10
Caution: This command is used to set the PRESET mode control.