TBK vision RYK416HB, Инструкция по эксплуатации

Страница: 6 / 8

5
•
If the auto iris lens is setup to the DC Drive (or Direct
Drive), the Switch (5) should be in position with the DC
Drive. Adjust the VR (3) to the proper level.
•
If video drive iris lens is used, the switch (5) should be in
position with the Video DR.
•
When using manual iris lens, DIP S.W switch (2) is select-able
depending on the environment.
BLC FUNCTION
Set switch-OFF/ BLC to BLC to enable back light compensation
(BLC) function.
AGC-HI / AGC-LO FUNCTION
AGC maximum gain setup to high/ low (AGC-Hi
mode--The maximum AGC gain is approximately 26dB.
AGC-Lo mode--The maximum AGC gain is approximately
16dB).
FLICKERLESS FUNCTION
Set the switch-OFF/ FLON. Set to FLON to enable flickerless
function, in this mode, the switch-AES/ OFF is auto
disabled.
LINE LOCK FUNCTION (for AC-Type only)
When using line lock function, the switch-INT/L.L. should
be in position with L.L. and adjust MWB/ Phase (8), use
up-key and down-key to adjust the proper phase (Note: If
you want to adjust the phase, the switch-AWB/ MWB
should be in position with AWB).