3
5. Installation & Operation
(1)
Please select the most suitable position on the wall or ceiling to install
the camera.
(2)
Rotate the dome housing counterclockwise to remove it from the
mounting base (shown on figure 1).
(3)
Set the mounting base onto the wall or ceiling and center it over
the mounting hole, using the two retaining screws for the main
body, supplied by the appurtenance bag (shown on figure 1).
(4)
The unit has a factory installed back conduit entry and one may
adjust the cables to side conduit entry according to installation
requirement (shown on figure 2).
Figure 1