User Manual TBK NEO
34
1) HDD invalid: “Enable/Disable” 2 options, setup according to the user needs.
2) HDD full: “Enable/Disable” 2 options, setup according to the user needs.
3) Trigger: Choose the channels need to be triggered
4) IP address conflict: “Enable/Disable” 2 options, setup according to the user needs.
5) Trigger: The processing for alarming, click “settings” display as below:
Trigger recording: Place a check mark '√' for the channel you need to trigger, when there is alarm on
the setting channel, will trigger to other channels.
Snapshot: Place a check mark '√' in front the channel, when the setting channel has alarm, will snap
a picture.
Send E-mail: Place a check mark '√', when there is alarm, will send the snapped picture to the
mailbox you set.
Alarm output: Place a check mark '√', will trigger the external alarm.
Alarm output duration: Click the inverted triangle, options: 10s/ 30s/ 1min/ 3 min/ 5min/ 10min/
15min/ 30min.
Buzzer: Click the inverted triangle, options: None/10s/ 30s/ 1min/ 3 min/ 5min/ 10min/ 15min/
30min.
Pop-out image: Click the inverted triangle, options: None/ CH1/ CH2…
Post-record: Click the inverted triangle, options: 10s/ 30s/ 1min/ 3 min/ 5min/ 10min/ 15min/
30min.
Pre-record: Click the inverted triangle, options: None/ 5s/ 10s
Trigger PTZ: None/ Cruise line/ Preset point
Attention: Click “Apply” after setup.
