than the high quality 6.8 uf film capacitor supplied. Be sure to connect the wiring
in the proper phase for best performance and imaging.
If your front speakers are coaxial then it is best to disconnect the tweeter or cut
one wire going to the tweeter for best performance. In using the TWEP51 it is
important that they are the only source for the high frequencies. It is okay to use
multiple TWEP51 tweeters when using additional full range sources such as the
rear deck speakers. This will provide a central image for most stereo sources
when the front and rear fader is balanced. The rear speakers are best setup to
function for lower frequencies so as to provide a vivid front stage for your sound
presentation.
When flush mounting your tweeters you will need to cut a 1 15/16 (45mm) with
9/16 (14mm) depth requirement for the flush mounting retainer cup. Use the
flush mount retaining rings to secure the enclosure from the back side of the
hole. For all other flush mounting enclosures please use the holes at the base of
the enclosure for marking your mounting holes.
FIG 1
The above drawing represents typical situations and the installations can vary
depending on the vehicle. It is important to follow the above instructions as
accurately as possible but excellent performance can be attained if you must
position your tweeters differently. It always best to angle the tweeter opposite
your seat toward your head when the tweeters are located close to the floor.
Flush mounted dash mounted tweeters can use the front windshield to reflect all
of the high frequency energy into the cabin and is an excellent location for dash
mounted systems. Flush mounted tweeters mounted in the rear shelf of sedans
can also use the rear window to reflect their high frequencies into the cabin.
Keep tweeters and midrange as close as you can regardless of the final
positions.
Содержание TWEP51
Страница 3: ......
