4
Use only original parts from the manufacturer for extension or
replacement of the high-pressure hoses. Other hoses are generally
unsuitable; their use may result in considerable hazard for persons
and/or property.
The unit may only be run with CO
2
from pressure cylinders with a riser
pipe. No liability is assumed for consequential damage caused by use of
other gases. Moreover, any warranty from the manufacturer expires.
The CO
2
-Jet-Master from the nozzle is extremely cold (-70°C) and must
never be aimed at people. Danger of frostbite and irreversible damage.
CO
2
gas is heavier than air and may accumulate in low ceiling spaces
causing deficiency of oxygen. Danger of suffocation.
Ensure sufficient ventilation when installing the Jet-Master in interior
rooms. If installed permanently, also install a CO
2
alarm system if
applicable.
All metallic parts of the unit, including the hand valves of the CO
2
bottles,
may be extremely cold after use. Danger of frostbite. Wear cold-insulating
gloves when touching cold parts of the unit.
5. Shut-down
At least once a year the device should undergo a safety inspection,
maintenance and adjustment by the manufacturer. Either an appointment
must be made with the manufacturer to have the unit inspected, or it must
be sent in.
!
!
!
!
!
!
!