TBC DPI1K Скачать руководство пользователя страница 2

PAGE 2

Safe use of the system is possible only when the user manual is read completely and the 

instructions contained are strictly observed.
Failure to comply with instructions marked with the ”NOTICE” symbol may result in serious 

damage to the system or one of its components.
Read all instructions before using this product.
Important safety information on TBC

®

 products can be found under the following headings: 

  DANGER - 

Failure to comply with these instructions will result in severe personal    

   

 injury. 

 

WARNING

 - 

Failure to comply with these instructions may result in severe  

 

   

      personal injury.

 CAUTION

 - 

Failure to comply with these instructions can result in minor personal      

   

    injury.

 NOTICE

 - 

Failure to comply with these instructions can result in property damage.

 

WARNING

• This appliance can be used by children aged from 8 years and by persons with 

reduced physical, sensory or mental capabilities or lack of experience and 

knowledge if they have been given supervision or instruction concerning use of 

the appliance in a safe way and understand the hazards involved.

• Children shall not play with the appliance. Cleaning and user maintenance shall 

not be made by children without supervision.

 

Only for US and Canadian markets

• Persons who do not have the necessary experience or knowledge of the product/

products must not use the product/products. Besides, persons with reduced 

physical, sensory or mental abilities must not use the product/products, unless they 

are under surveillance or they have been thoroughly instructed in the use of the 

apparatus by a person who is responsible for the safety of these persons.

• Moreover, children must be under surveillance to ensure that they do not play with 

the product.

• It is the operator’s responsibility to ensure that there is free space for the 

application to move without risk for the operator or bystanders before operating 

the application.

 CAUTION

 

Load on the table

 

Risk of injury to persons and of malfunction

• Do not overload the frame.

• Place heavy load centrally on the desk.

• Do not use the desk as a work bench.

• Do not use the frame for lifting persons.

• Do not stand on the desk while it is driving up or down.

IMPORTANT SAFETY INFORMATION - READ AND SAVE

Содержание DPI1K













Отзывы: