TBB power RiiO Sun Series, Руководство пользователя, Страница: 28 / 40

RiiO Sun User Manual
23
53
ACin stop charging SOC in the ACin backup mode
Select ACin First mode in the setting item 12
AC in source priority, then when the lithium
battery reaches the set SOC threshold, the AC
input will stop charging the battery.
30~99%
Step:1%
Default:80%
(
≥
Low SOC alarm thr
1%)
54
SOC enough threshold
When the lithium battery reaches the set SOC
threshold, it will stop charging.
30~99%
Step:1%
Default:80%
(
≥ Low SOC alarm thr
1)
Mode Setting
62
Bypass supply control
When the inverter fails, you can set whether to
enable the AC input to supply power to the load
0-Disable
1-Enable
Default:1
63
N2G voltage detect
(The voltage between the Neutral and the GND)
You can set whether to enable the alarm function
when Neutral and the GND voltage exceed the
limit.
0-Disable
1-Enable
Default:1
64
Main switch selection
In Default state, the inverter is controlled through
the touch button.
In Mobile Only mode, it is controlled through the
rocker switch. Press the rocker switch to the ON
position, the inverter will be switched on. Press the
rocker switch to the OFF position, the inverter can
only charge the battery because the AC input
source can automatically wake up the inverter for
charging. When there is no AC input source, it will
automatically shut down after 3 minutes.
REGO System: It is not applicable for the RiiO Sun
Series. Do not choose it.
0- Default
1- Mobile
2- REGO System
Default:0
66
Charging current optimization
You can set whether to enable the DC battery
charging current optimization mode to reduce the
charging current ripple
0-Disable
1-Enable
Default:0
(only in standby mode)
67
MPPT charger number
Set the number of SP series MPPT chargers
connected to the inverter
1~6
Step:1
Default:1