TBB power Energier Apollo Series, Руководство пользователя

Страница: 31 / 62

Energier Apollo User Manual
TBB Power Co.
，
Ltd
25
6. Installation and Connection
For the user operation safety, cut off the power before installation.
6.1 General advice

Ensure that the Energier Apollo has the correct DC voltage with your existing battery system.

Install Energier Apollo as close to the batteries as possible reducing the voltage drop on cable for
the better performance of the equipment.
Do not connect the output of this equipment to your AC system at the same time as
any other AC source such as the 230V external mains or a generator.

On the AC output side, we recommend connecting the output from Energier Apollo to a suitable
Residual Current Circuit Breaker and Circuit Breaker.

The neutral of this equipment is not connected to the earth. If requested, additional devices need
to be installed internally. Please contact your installer.
6.2 Fix the equipment
Energier Apollo could be installed either vertically on wall or horizontally on floor. Please follow the
below steps for the wall mounting.
Step 1: Choose a flat wall, fix the brace supplied with 4*M6 screw.