10
Owner’s Manual
COMPACT TILLER AND CULTIVATOR
Get parts online at
www.tazzoutdoorproducts.com
or Call
800-345-6007
M-F 8-5 CST
UNPACKING AND ASSEMBLY
Carefully remove tiller assembly, additional assembly
components and remaining packaging materials from
package.
FIGURE 3
CARTON CONTENTS
TILLER ASSEMBLY
•
Hardware Parts Bag:
•
A - (4) M8 x 40 mm Hex Bolt
•
B - (4) M8 x 40 mm Hex Flange Bolt
•
C - (2) M10 x 45 mm Hex Bolt
•
E - (6) M8 x 25 mm Flat Washer
•
F - (2) M10 Spring Lock Washer
•
G - (2) M8 x 16 mm Washer
•
H - (8) M8 Nylock Nut
•
I - (2) M10 Nylock Nut
•
J - (1) Lock Pin
•
K - (2) Tine Shaft Sleeve
•
Manual Parts Bag
•
Left, Right, and Middle Handlebars
•
Left and Right Side Shields
•
Left and Right Tine Sets
•
Pulley Box Cover
•
D - (4) M5 x 25 mm Hex Flange Bolt
•
Drag Stake
•
Bottle of 4-cycle Engine Oil
FIGURE 2
4X
Open top of carton and remove packaging materials.
Carefully cut the corners of the carton with a box cutter.
Do not attempt to lift tiller assembly out of box.
WARNING
COMBUSTIBLE DEBRIS CAN CATCH FIRE. IT IS A VIOLATION
OF CALIFORNIA PUBLIC RESOURCE CODE, SECTION 4442,
TO USE OR OPERATE ENGINE-POWERED PRODUCTS
ON ANY FOREST-COVERED, BRUSH-COVERED, OR GRASS-
COVERED LAND UNLESS THE EXHAUST SYSTEM IS
EQUIPPED WITH A SPARK ARRESTER, AS DEFINED IN
SECTION 4442, MAINTAINED IN EFFECTIVE WORKING
ORDER. OTHER STATES OR FEDERAL JURISDICTIONS MAY
HAVE SIMILAR LAWS. CONTACT THE ORIGINAL EQUIPMENT
MANUFACTURER, RETAILER, OR DEALER TO OBTAIN A
SPARK ARRESTER DESIGNED FOR USE WITH THIS PRODUCT.
NOTICE
HANDLE ROTOTILLER WITH CARE. DO NOT DAMAGE
FORWARD CABLE WHEN TRANSPORTING OR OPERATING.
ENGINE IS SHIPPED FROM FACTORY WITHOUT OIL. YOU
MUST ADD ENGINE OIL BEFORE STARTING ENGINE.
