Adjustable Buckle Assembly Instructions
The cover will ship with either a 10 pack starter kit of tie down straps, or an
80 foot coil* of tie down strap webbing. Depending on the style and size of
the cover, you may need to obtain additional straps to utilize all of the tie
down loops on your cover. If you are trailing your boat with the cover on, we
recommend utilizing every tie down loop on the cover, which may require
the purchase of additional tie downs from your retailer.
*Note – if you received an 80 foot coil, you will need to cut to your desired
length. We recommend that you burn the ends of the cord with a lighter to
prevent the cord from unraveling.
Thread webbing through adjustable buckle. Insert the end from the back-
side of the buckle, through the middle opening on buckle as shown in the
first picture. Now insert end of webbing through the bottom opening of
the buckle (from the front side) and pull down until the strap is tightened
securely as in the picture below.
Tips to prolong the life of your cover
•
Pad sharp edges
•
Use a Support Pole or Support System
•
Install a Vent
•
Make sure cover is properly secured when trailering, and check
frequently during travel
•
Do not let snow, water, or ice pool on the cover (Note: the warranty of the
cover will not apply if cover is not properly maintained)
4
