2022-012-R-0017-A2_Draft 4
11
O T I M U S
S O R T E R S
Gateway
9. Connect the power cable (A).
10. Put the power adapter (B) in a wall
socket.
Warning
: - Make sure that the
solarpannels, the smart modules and
the inverter are installed correctly.
- Before you switch the inverter on or off,
stop the gateway. Set the power switch
of the gateway in the off position (0).
11. Start the inverter. On the inverter, set the
DC switch to on.
B
A
6
12. On the 'launch' screen (A), select the
'launch' button (B). When the system
onboarding is confirmed, the customer
receives an e-mail to register to the
Taylor dashboard.
B
A
10
XXXXXXXXXXXXXXXXXXXXXX
9
XXXXXXXXXXXXXXXXXXXXXX
8
XXXXXXXXXXXXXXXXXXXXXX
7
XXXXXXXXXXXXXXXXXXXXXX
6
XXXXXXXXXXXXXXXXXXXXXX
5
XXXXXXXXXXXXXXXXXXXXXX
4
XXXXXXXXXXXXXXXXXXXXXX
3
XXXXXXXXXXXXXXXXXXXXXX
2
XXXXXXXXXXXXXXXXXXXXXX
1
XXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXX
GTW
7
13. Set the switch (A) in the on position.
The light in the switch comes on.
Note
:
- A few seconds may be necessary for
the system to start.
- If a 4G connection is not available,
use a wired LAN connection. If a wifi
connection is necessary, please refer to
Taylor.
A
8
10
