manualshive.com logo in svg

Taylor C723, Руководство оператора

Поделиться
Скачать
Taylor C723 Скачать руководство пользователя страница 28

5-6  

USER INTERFACE

Model C723 

User Interface 

5 

Manager's Menu

The Manager's Menu is used to enter the operator 
function displays. To access the menu, press the center 

of the cone symbol   on the control panel on the right 
side of the machine. The arrow symbols, the SEL 
symbol, and the cone symbol   will be lit when the 
Access Code screen is displayed. (See Figure 5-11.)

Figure 5-11

In the menu program, the arrow symbols and the SEL 
symbol will function as menu keys.

•

Up Arrow

—increases the value above the 

cursor and is used to scroll upward in text 

displays.

•

Down Arrow

—decreases the value above the 

cursor and is used to scroll downward in text 
displays.

•

SEL

—advances the cursor position to the right 

and is used to select menu options.

Note:

The machine will continue operation in the mode 

it was in when the menu was selected. However, the 
control keys will not be lit and are nonfunctional when the 
Manager's Menu is displayed.

Entering Access Code

With the ENTER ACCESS CODE screen on the display, 
use the SEL symbol to set the first code number in the 
cursor position. When the correct number is selected, 
press the SEL symbol to move the cursor to the next 
number position. (See Figure 5-12.)

Figure 5-12

Continue to enter the proper access code numbers 
(8309) until all four numbers are displayed, and then 
press the SEL symbol. The Manager's Menu list will 
display on the screen, provided the correct access code 
is entered.

If an incorrect number is entered for the access code, the 
display will exit the menu program when the SEL symbol 
is selected.

Menu Options

Press the arrow to move up or down through the menu. 
Select a menu option by pressing the SEL symbol. Exit 
the menu program by selecting EXIT FROM MENU or 
press the cone symbol.

The following menu options are listed in the Manager's 
Menu:

EXIT FROM MENU

SERVINGS COUNTER

SET CLOCK

AUTO START TIME

STANDBY MODE

MIX LEVEL AUDIBLE

FAULT DESCRIPTION

FAULT HISTORY

LOCKOUT HISTORY

SYSTEM INFORMATION

CURRENT CONDITIONS

NET SERVICE PIN

Selecting EXIT FROM MENU will exit the Manager's 
Menu and then return the control panel symbols to 
normal operation.

The SERVINGS COUNTER screen is used to reset the 
servings counter to zero. The SERVINGS COUNTER 
automatically resets to zero when the machine is 

brush-cleaned. (See Figure 5-13.)

13924

ENTER ACCESS CODE

8

3

0

9

__

Содержание C723

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды