Taylor C303, Руководство оператора

Страница: 38 / 53

6-10
OPERATING PROCEDURES
Model C303 & C314
Operating Procedures
6
120 Day Closing Procedure
We recommend that the machine be completely
disassembled and cleaned at least every 120 days using
the following procedures.
To disassemble the machine, the following items will be
needed:
• Two cleaning pails
• Necessary brushes (provided with freezer)
• Cleaner
• Single-service towels
Draining Product from the Freezing
Cylinders
1. Press the BEATER (- - -) key. This will allow the
beater to operate, and CO
2
pressure will be
maintained to push the product from the freezing
cylinder.
Open the draw valve and drain all the
product from the machine.
Figure 6-38
2. When all the product has been drained from the
freezing cylinder, close the draw valve and press the
OFF (<- -) key. Discard this product.
Figure 6-39
3. Repeat step 1 through step 2 for the other freezing
cylinders.
Rinsing
1. To place a freezing cylinder in the RINSE mode,
press the MENU SELECT key. Move the cursor by
pressing the AUTO (- ->) key until the third line
indicates RINSE / SANITIZE.
2. Press the MENU SELECT key. Move the cursor
under RINSE by pressing the OFF (<- -) key twice.
3. Pressing the MENU SELECT key will give you the
option for rinsing a freezing cylinder. Move the cursor
under the desired barrel.
4. Pressing the MENU SELECT key at this time will
start the beater motor and deliver water and CO
2
to
the freezing cylinder.
!
ALWAYS FOLLOW LOCAL HEALTH CODES.
13040
13039
OPERATOR MENU
A B C D E F G H I
RINSE / SANITIZE
L E S > - - - - <
RINSE / SANITIZE
RINSE SANITIZE EXIT
- - - -
L E S > - - - - <
SEL <- - - ->
EXIT BRL 1 2 3
RINSE