Taylor 5282002, Инструкция по эксплуатации

Страница: 4 / 20

GENERAL WEIGHING OPERATION
1. Place the scale on a hard, level surface.
2. Press “
q
| UNIT ” button to turn the scale on. The display will
turn on, show “ ”, then zero when it is ready for use.
3. Your scale is set at the factory to weigh in pound/ounces.
To switch between pounds/ounces (lb oz), grams (g), fluid
ounces (fl.oz.) and milliliters (ml), press “
q
|
UNIT
” button.
4. Place the item to be weighed on the center of the platform.
The weight will display. As you add weight, the weight
displayed increases.
5. The scale will turn off automatically after approximately
3 minutes. Press and hold “
q
| UNIT ” button to turn the scale
off manually.
HOLD OPERATION
When the “ HOLD ” function is turned on, the LCD screen will continue
to display the weight after the item is removed from the platform.
To turn on the Hold function:
1.
While the scale is on, place the item to be weighed on the
platform.
2. To lock in the weight of the item on the platform, press “ HOLD ”
button and the “ HOLD ” icon appears on the display.
3. To release the hold function before the scale shuts off, press
the “ HOLD ” button again to unlock the weight and the icon
disappears from the display.
Notes: The “ HOLD ” function can only operate if the weight is stable
on the platform. If the weight is unstable, check to see that the
scale platform rests properly on the scale. If necessary, move the
item slightly on the platform until the weight locks in.