![Taylor-Dunn Huskey C-426 Скачать руководство пользователя страница 12](http://html1.mh-extra.com/html/taylor-dunn/huskey-c-426/huskey-c-426_operators-manual_3775017012.webp)
Page 12
C0-426-48AC Operator’s Manual
MC-425-14
VEHICLE MODIFICATIONS
Taylor-Dunn vehicles are designed and manufactured in accordance with ANSI/ITSDF, and OSHA
regulations.
Electrical and/or mechanical modifications are not approved. This includes the use of replacement
components not obtained from Taylor-Dunn or the use of Taylor-Dunn components intended for
other models..
Motor Speed Control Programming:
Taylor-Dunn programmable motor speed controls are
programmed at the factory for optimum safe, efficient,
and smooth operation of the vehicle. The program
settings are based on many factors including but not
limited to: Vehicle Model, Maximum Safe Speed, System
Voltage, Drive Axle Configuration, Vehicle Configuration,
etc.
Taylor-Dunn will only authorize the use of settings
obtained from the factory for a specific vehicle. Any other
alterations to the programming ARE NOT AUTHORIZED.
Imp ro p e r p ro g ra m mi n g m ay
cause unexpected operation of
the vehicle and/or damage the
electrical components. This could
result in severe bodily injury and/
or property damage
WARNING