Taylor-Dunn G-100 2018 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 111

Taylor-Dunn G-100 2018 Скачать руководство пользователя страница 11

SAFETY

SAFETY TRAINING

Safety training is a top priority for Taylor-Dunn. All operators of this vehicle
should take a ROHVA approved training course.

ROHVA (Recreational Off-Highway Vehicle Association) provides both an online
safety e-course and a hands-on safety course. Visit www.rohva.org.

Your Taylor-Dunn vehicle is considered an off-road vehicle. Familiarize yourself
with all laws and regulations concerning the operation of this vehicle in your
area.

We strongly advise you to strictly follow the recommended maintenance
program outlined in your owner's manual. This preventive maintenance program
is designed to ensure that all critical components on your vehicle are thoroughly
inspected at specific intervals.

For more information about recreational off-road vehicle safety in the
United States, visit www.rohva.org, call 866-267-2751.

SAFE RIDING GEAR

Always wear the proper clothing when operating or riding in this vehicle. All
riders should wear substantial footwear, long pants and a close-fitting shirt. A
hard hat or helmet and approved eye protection are recommended when
appropriate for working or riding conditions. Taylor-Dunn recommends wearing
approved eye protection bearing markings such as VESC 8, V-8, Z87.1 or CE.
Never operate or ride in this vehicle while barefoot or while wearing sandals or
tennis shoes.

Workplace safety regulations may require the use of safety glasses, safety
shoes and a hard hat or helmet. Familiarize yourself with local requirements, be
prepared for operating conditions and wear the appropriate safety gear.

RIDER COMFORT

Under certain operating conditions, heat generated by the engine and exhaust
system can elevate temperatures in the driver and passenger cab area. The
condition occurs most frequently when a vehicle is being operated in high
ambient temperatures at low speeds and/ or high load conditions for an
extended period of time. The use of certain windshield, roof and/or cab systems
may contribute to this condition by restricting airflow. Any discomfort due to heat
buildup in this area can be minimized by wearing proper riding apparel and by
varying speeds to increase airflow.

9

«
...
9
10
11
12
13
...
»

Содержание G-100 2018
















































































































Отзывы:

Нет отзывов