Taylor-Dunn BT-280-36 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 56

background image

Page 22

Operator Manual

MB-280-02

Maintenance Monitor

Note: The Maintenance Monitor function is optional. The

Maintenance Monitor function can be turned ON or OFF
by your dealer.

Operation:

The SVD notifies the operator 10-hours (standard)

before a scheduled maintenance is due. During this warning
period, the meter will continue to alert the operator. This should

allow sufficient time for the operator to schedule the maintenance that is due, with minimal down

time. If the scheduled maintenance is not performed before the warning period elapses, then

the vehicles maximum speed will be significantly reduced.

Warning Period: The warning starts when the Maintenance Indicator is ON and the Wrench icon

is flashing. The Wrench icon will continue to flash until the warning time has expired.

Maintenance Due: Once the warning has expired and the maintenance is due, the Wrench icon

will stop flashing and remain ON. Additionally, the vehicles maximum speed will be significantly

reduced until the maintenance is performed and the display is reset. The display should only be

reset by an authorized technician. Refer to the Illustrated parts section for information regarding

tools required to reset the Smart View Display.

Speed Controller Status: The display will indicate a fault code
whenever the control system logic detects a problem with the
control system. A fault code is being displayed whenever the
Fault Code Indicator (the letter ‘F’) is visible at the left of the
numeric display. Refer to the fault code table in this section for
a summery description of the fault codes.

System Fault Monitor

The display will indicate a fault code whenever the control system
logic detects a problem with the control system. A fault code is
being displayed whenever the Fault Code Indicator (the letter ‘F’)
is visible at the left of the numeric display. Refer to the fault code
table in this section for a summery description of the fault codes.

«
...
20
21
22
23
24
...
»

Содержание BT-280-36

























































Отзывы:

Нет отзывов

Похожие инструкции для BT-280-36

Бренд: Triumph Страницы: 86

Бренд: Camcar Страницы: 2

1306 RAPID SYSTEM

Бренд: Thule Страницы: 8

Бренд: Mobile Create Страницы: 15

Бренд: Dometic Страницы: 158

Бренд: Thule Страницы: 12

VIEWLINE 52 MM - MOUNTING 11-09

Бренд: VDO Страницы: 4

Бренд: Ecco Страницы: 12

Бренд: SCC Страницы: 4

Бренд: Hama Страницы: 4

Бренд: Volvo Страницы: 230

Бренд: Sagem Страницы: 10

Бренд: Fab Fours Страницы: 21

Бренд: Ratio Страницы: 12

Бренд: Horn Tools Страницы: 8

Бренд: Lexus Страницы: 6

Бренд: Mid America Motorworks Страницы: 2

Бренд: MovaNext Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды