tayco Up, Руководство по установке, Страница: 48 / 94

The metal flush gable is used to
support worksurfaces from the
support post in either a left, right or
shared position.
1. Remove the top cap from the
support posts, (Figure 1).
2. Slide the 21 slots cantilever
support plate into the appropriate
post channel at the specified
locations, on the posts to support
the metal flush gable, (Figure 2)
and secure with a, #10, 5/8-inch
hex head black set screw at its
base, (Figure 3).
3. Hook the metal flush gable onto
the slotted plate of the smaller
post, ensure that the locking
mechanism is engaged by
pushing pushing down on the
gable, (Figure 4). Repeat with
the other post on the spine.
FIGURE 1
worksurface support
metal flush gable installation
FIGURE 3 FIGURE 2
FIGURE 4
NOTES:
> The locking mechanisms are
spring loaded and will lock
automatically; to disengage push
the lock away from the post and
unhook the post.
1