tayco The Shield Series, Руководство по установке

Страница: 20 / 26

Universal Blade Screen
Tools & Hardware Needed
8540-1217 8540-1170
Drill Robertson # 2 Tape Measure #8 X 2" Flat Head
Screws
1/4 -20 X 1/4 SS
Screw (4X)
4
5
1
5
3
3
3
2
6
5
3
6
5
1.
Check frameless blade
extrusion if there is a Xmas
tree clip on both ends.
2.
Position the frameless blade
extrusion to the middle of
top trim.
3.
Securely fasten frameless
blade extrusion on top trim
using #8 X 2” Flat Head Self
Drilling Screws .
NOTE:
Make sure there is
something solid for the screws
to bite into to secure the
frameless blade extrusion,
please see Shield Screens
Application Guide, Blade
Extrusion Hole Location.
4.
Install glass/acrylic with plastic
gasket into the frameless
blade extrusion .
5.
Align and secure the
glass/acrylic by inserting 1/4-
20 X 1/4” Socket Set Screw
through each of the holes on
the side of the frameless blade
extrusion using allen key
driver.
6.
Tighten gently each side until
the glass/acrylic is centered
and secured.
Note: Do not overtighten.
Check the frameless blade
extrusion if it is straight.
Overtightening set screws will
bend the Frameless Blade
Extrusion outward and end
caps will not fit.
7.
Insert the end cap on both
ends of the Frameless Blade
Extrusion then push it down to
X-MAS TREE
FRAMELESS BLADE EXTRUSION
#8 X 2” FLAT HEAD SCREW
GLASS/ACRYLIC WITH PLASTIC GASKET
1/4-20 X 1/4” SOCKET SET SCREW
END CAP
1
2
3
4
1
2
3
4
5
6
1
5
6
1
1
November 2022 the shield collection 20