tayco One-Touch, Руководство по установке, Страница: 16 / 20

1. Place the table top face down on
a smooth clean surface. Install
the ganging mechanisms to the:
(A) front of the desk and to the
(B) side of the desk with the
provided #10x11/16-inch oval
head screws using #2 Robertson
bit (Figure 1).
2. Connect the two worksurfaces by
inserting the ganging mechanism
parts in each other and tightening
the knob (Figure 2).
ganging mechanism for "L" end connection
FIGURE 2
tools and hardware needed
drill #2 Robertson bit
14, #10; 11/16"
ovalhead screw
user edge
user edge
A
B
A
A
NOTES:
> To gang two worksurfaces;
both must have the same
width.
FIGURE 1
JUNE 2011 one-touch table 13