TAWI PRO40, Руководство пользователя

Страница: 19 / 25

19
Position stop
A Position stop switch can be assembled on the mast between the top and bottom position switches. The
Position stop can also be assembled at delivery
Ladder
TAWI
Lifting Trolleys have a ladder accessory which can be used to facilitate work. Be careful when using the lad-
der accessory along with the lifter, and pay attention to the sticker on the ladder, see Label on
TAWI
Lifting Trolley
ladder on page 10 .
When using a ladder there is a risk of slipping and falling off it. Be careful and make sure:
• To have a good grasp of a supporting object when stepping onto and climbing the ladder.
• To have clean shoes with a good grip.
• That the ladder is clean and provides a good grip for your feet.
• Do not exceed the max load of the ladder, see
Label on
TAWI
Lifting Trolley ladder on page 10 .
• The brake must be applied on the lifter when using the ladder.
1. The Position stop hand control has a button on top.
2. Press the top button (C) to activate the Position stop.
» Response: The top button (C) is activated and lit.
3. Depending on how the Position stop is configured, press UP (A) or
DOWN (B) to move the tool to desired position.
4. The tool stops when reaching the Position stop.
» Response: The tool stops.
5. Press the top button (C) to move the tool past the position switch.
» Response: The top button (C) stops being lit.
B
A
C
The Position stop is configured to stop the tool when the tool moves upwards or downwards. Contact a TAWI
authorised service technician for support with configuration of the Position stop.
• There is always one top limit switch and one bottom limit switch assembled on the lifter. Make sure the
Position stop switch is placed between the top and bottom limit switches.
• NEVER move the top or bottom limit switches.