PAGE 3
PAGE 6
Page 6
Page 3
Installation Procedure
Important:
Before starting the installation process, make sure the electrical supply
is switched off. It is recommended that the fuse is withdrawn or the circuit breaker
is switched off for the necessary circuit.
Important:
Before starting the installation process, ensure the wall construction is
suitable and can support the weight of the mirror.
Note:
The wall plugs supplied are suitable for solid stone / brick walls. For any
other wall material use specialist wall plugs.
1)
Measure the distance (X) between the keyhole slots on the back of the mirror.
2)
Mark out the fixing screw positions on the wall using a pencil to the desired
height, ensuring they are spaced at distance (X).
3)
Drill the marked out positions and fit the wall plugs accordingly. Fix the screw into
position, leaving a small amount of the screw head proud of the wall for hanging.
4) Make the electrical connection from the mirror to the mains supply. Use the
connection wire found at the rear of the mirror to make the necessary connections in
accordance with the current IEE regulations. A second person will need to hold the
mirror in place whilst electrical connections are made.
5)
The mirror should easily slide onto the fixing screws and secure into place.
NOTE: To secure the mirror further, a small amount of silicone sealant can be applied
to the side of the extrusions to prevent the mirror being accidently pulled away from
the wall.
To remove the mirror, the mirror should first be lifted and then pulled away from the
wall.
Portrait (X)
Landscape (X)
Bluetooth
®
Pairing to your device
1. Turn your iOS, Android, or Windows device’s Bluetooth
®
ON and search for new
devices Bluetooth
®
.
2. Turn on the Bluetooth
®
by pressing the symbol. The mirror will sound to signal
that Bluetooth
®
is on. It will sound again to state it’s in pairing mode.
3. Select “Resonate” on your device list. If asked for a passcode, enter “0000”, and
the device will pair.
4. Once connected the mirror will sound again to signal that the pairing has been
successful.
Note: The paired device will be saved on the product and the pairing process will
only need to be re-initiated if the pairing is forgotten on your device.
Note: The mirror can store up to 4 devices on its memory. If you connect 5 devices,
the mirror will forget the first device.
Repairing to your device
1. Turn Bluetooth
®
connectivity off on any previously paired devices
2. Follow the “Pairing to your device” above
Note: If a previously paired device is not present within the Bluetooth
®
range then
the product will re-enter pairing mode.
Playing music on your speakers
When connected via Bluetooth
®
, play music on your device and the sound will play
through the Resonate Mirror.
Notes:
• Some devices may require you to select the audio output.
• Only your device can be used to change volume, skip songs and play/pause the
selected media.
• Make sure your device is within 7-10 meters of the product playing music.
• Only 1 device can play music at a time.
Connecting via Bluetooth
®