Taurus White & Brown DARKFIRE, Руководство пользователя

Страница: 6 / 54

- Push the mode selector to change from power
mode to temperature mode in any moment. The
LED display will show 200, indicating starting
temperature is 200ºC or 210ºC.
- To change the temperature level, just slide the
finger through the slide control.
NOTE: Darkfire plate has 8 temperature levels
equivalent to: 60ºC, 80ºC, 120ºC, 150ºC, 180ºC,
200ºC, 220ºC, 240ºC.
NOTE: Darkfire Duo plate has 7 temperature
levels equivalent to: 60ºC, 90ºC, 120ºC, 150ºC,
180ºC, 210ºC, 240ºC.
TIMER FUNCTION
-The appliance’s operating time can be control-
led.
- In order to do it, push the timer button. The
LED display will show 0:30.
-Use the Slide control to change the time
settings.
- Slide your finger to add or subtract 10 minutes.
-Push at the ends of the slide control to add or
diminish one minute.
- Push again the timer button or wait 3 seconds.
The value remaining will be alternating with the
power level or temperature level you chose.
-To cancel this option push again the timer
button or switch off the appliance. The timer
indicator will shut off.
SAFETY LOCK
- The safety lock position stops the on switch
from activating; it prevents the appliance from
being switched on accidentally.
- To activate the lock function, push during 3 se -
conds the child lock button. The lock indicator
will be activated and all the buttons despite the
On/Off button will not be able to push.
- To cancel this function, push during 3 seconds
the lock button until the indicators goes off, or
switch of the appliance.
STAND-BY FUNCTION
- In order to save energy, the appliance passes
to stand-by after 30 seconds if the user does
not use it or the cooking accessory has been
removed from the hob.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE
- Stop the appliance using the on/off switch.
- Unplug the appliance from the mains.
- Clean the appliance.
ERROR CODES
The screen can show different Error codes.
E0 → The accessory you are using is not
detected.
E1 → Don’t reach minimum voltage
E2 → Too much Voltage for the plate.
E3 → Thermostat open
E4 → Thermostat broke
E5 → PCB Thermostat open
E6 → PCB Thermostat Broken
E7 → Interior temperature detection system
broke.
E8 → Internal error not determined.
E9 → Overheating.
For E0, check if the accessory for cooking is
induction compatible.
Fore E1 – E9, take the appliance to the closest
Technical assistance Service.
CLEANING
-Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
-Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- It is advisable to clean the appliance regularly
and remove any food remains.
RECYCLING
- These electrical products, cables, batteries,
packaging, and the manual, should not be mi -
xed with general household waste. For proper
recycling, please take these products to your
nearest Creative Housewares office where they
will be accepted for recycling free of charge.
- Alternatively, please contact your local au -
thority or household waste disposal service
for further details of your nearest designated
collection point. Correct product disposal saves
resources and prevents negative effects on
human health and the environment.
974671_IM.indd 13 2020/09/10 11:12:43