Taurus White & Brown Darkfire Daily, Руководство пользователя, Страница: 5 / 36

English
Portable induction plate
Darkfire Daily
DESCRIPTION
A Induction hob
B Timer
C Button –
D Function selector
E
F On/Off button
G LED screen
H Temperature indicator.
- If the model of your appliance does not have
the accessories described above, they can
also be bought separately from the Technical
Assistance Service.
PRACTICAL
RECOMMENDATIONS
-Use cookware suitable for the size of the
hotplate.
-Do not use excess water to cook foods. The
more water used; the more energy needed.
-Whenever possible use a pressure cooker, it
saves time and energy.
- Switch the hotplates on only when the cookwa -
re is ready and switch them off before removing
it.
- Cookware must be flat.
-Use cookware suitable for the amount being
cooked. Large pots used for small amounts
increase power consumption.
-Cooking without using the lid for the cookware
increases power consumption.
USE AND CARE
- Fully extend the appliance’s power cable before
each use.
- Do not use the appliance if the on/off switch
does not work.
-Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
-Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
-Do not store the appliance if it is still hot.
INSTRUCTIONS FOR USE
BEFORE USE:
-Make sure that all products’ packaging has
been removed.
USE
-Connect the appliance to the mains.
-
Put the cooking accessory which you will use
to cook.
- Turn the appliance on, by using the on/off
button.
- The LED display will show 4 lines indicating
that it is in StandBy
-Prepare the appliance according to the function
you wish to use:
COOKING WITH POWER MODE
-Push the to start cooking. The LED
screen will show P6 showing the power level
where the cooking starts.
-Push the or – to change the power
level.
NOTE: this appliance has 9 power levels
equivalent to:
P1: 200W, P2: 500W, P3: 800W, P4: 1000W, P5:
1200W, P6: 1400W, P7: 1600W, P8: 1800W, P9:
2000W
COOKING WITH TEMPERATURE MODE
-Push the function selector two times from
standby mode to change to temperature
cooking mode. The LED display will show 200,
indicating 200 ºC.
-In order to change the temperature, push the
buttons – and +.
-The Temperature LED indicator will blink at the
temperature selected, while the lower tempera-
ture LED will come. This one will go running up
until it reaches the selected temperature.
NOTE: This appliance has 8 temperature
levels equivalent to:
60ºC, 80ºC, 120ºC, 150ºC, 170ºC, 200ºC,
220ºC, 240ºC.