Taurus Wellness TW-MC-M, Руководство по сборке и эксплуатации, Страница: 18 / 28

18
5 TROUBLESHOOTING, CARE AND MAINTENANCE
5.1 General Instructions
⚠
WARNING
+ Do not make any improper changes to the equipment.
⚠ CAUTION
+ Damaged or worn components may affect your safety and the life of the equipment.
Therefore, immediately replace damaged or worn components. In such a case, contact the
contract partner. The equipment must not be used until it has been repaired. If necessary, use
only original spare parts.
࣑ ATTENTION
+ In addition to the instructions and recommendations for maintenance and care given here,
additional service and/or repair work may be necessary; this must only be carried out by
authorised service technicians.
5.2 Faults and Fault Diagnosis
The equipment undergoes regular quality controls during production. Nevertheless, faults or
malfunctions may occur. Frequently, individual parts are responsible for these disturbances, an
exchange is usually sufficient. Please refer to the following overview for the most common errors and
how to correct them. If the equipment still does not function properly, contact your contract partner.
Fault Cause Solution
The device does not
work
Interrupted power
connection
+ Check cable connection
+ Power switch to on
The automatic timer has
expired
To switch the device on again, press the
On/Off button
Excessive use of the device
Disconnect the device from the mains
socket and allow the device to cool
down for at least 60 minutes before
using it again.
Heavy load on the device Reduce the load on the device
The device is
unusually warm
Excessive use of the device
Disconnect the device from the mains
socket and allow the device to cool
down for at least 60 minutes before
using it again.
The device makes
noise
Noise caused by the
mechanical parts of the
device
Noise during use of the device is normal.
If the noises sound unusual (crackling,
squeaking etc.), contact your contract
partner.