AFTER SALES SUPPORT
1300 922 271
8
m
5. Technical data
Motor power supply:
10.8V DC
Idling speed:
1st Gear:
2nd Gear:
0-350 rpm
0-1200 rpm
Torque settings:
19 + 1
Forward and reverse rotation:
Yes
Chuck capacity:
10mm
Battery charging voltage:
12V DC
Battery charging current:
500 mA
Mains voltage for charger:
230 - 240V~50 Hz
Weight:
1.2 kg
Max. screw diameter:
6mm
Sound and Vibration
Sound and vibration values were measured in
accordance with EN 60745.
L
pA
sound pressure level
64 dB(A)
K
pA
uncertainty
3 dB
L
WA
sound power level
75 dB(A)
K
WA
uncertainty
3 dB
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three
directions) determined in accordance with
EN 60745.
Drilling in concrete
Vibration emission value a
h
≤
2.5 m/s
2
K uncertainty = 1.5 m/s
2
Screwing without hammer action
Vibration emission value a
h
≤
2.5 m/s
2
K uncertainty = 1.5 m/s
2
Important!
The vibration value changes according to the area of
application of the electric tool and may exceed the
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect
working order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever
necessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
6. Before starting the
machine
Be sure to read the following information before
1.
Charge the battery pack with the charger
supplied.
2.
Only ever use screwdriver bits which are
suitable for the purpose and in faultless
condition.
3.
Always check for concealed electric cables
and gas and water pipes when drilling and
screwing in walls.
7. Operation
7.1 Charging the LI battery pack (Figs. 2/3/4)
The battery is protected from exhaustive
discharge. An integrated protective circuit
automatically switches off the equipment when
cease to turn.
Warning!
Do not press the ON/OFF switch any
more if the protective circuit has actuated. This
may damage the battery.
1.
Remove the battery pack (4) from the
handle, pressing the pushlock buttons (5) on
the left and right side to do so.
2.
Check that your mains voltage is the same
as that marked on the rating plate of the
battery charger (9). Plug the mains plug of
the battery charger (9) into the mains socket
outlet.
3.
Connect the charging cable (a) to the
charging adapter (8).
4.
The green LED on the battery charger (9) will
come on. Plug the battery pack (4) into the
charging adapter (8). In addition to the green
LED the red LED will come on to indicate
that the battery pack (4) is being charged.
When the charging period is completed after
approx. 3 - 5 hours, the red LED goes out
again. The temperature of the battery pack
(4) may rise during the charging operation.
This is normal.
If the battery pack (4) fails to become charged,
please check
•
whether there is voltage at the socket-outlet
•
whether there is good contact at the
charging contacts of the charging adapter
(8).
If the battery still fails to charge please call our
After Sales Support on 1300 922 271.
MODEL NUMBER: BT-CD 10.8 Li,
01/13
