Taurus TF-SR, Руководство по сборке и эксплуатации

Страница: 14 / 48

14
Smith Rack
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1: Connection of bending tubes with back connection tube
1. Fasten the first bending tube (1) on the back connection tube (4) by using two bolts (11), two
lock nuts (12) and four washers (13).
2. Repeat this step for the second bending tube.