Taurus TF-SCANDIC-X Series, Руководство по сборке и эксплуатации

Страница: 17 / 44

SCANDIC X
17
Step 5: Mounting the wall bracket
1. Drill four holes with a diameter of 7.9 mm with a masonry drill into the wall on
which you want to mount the ski trainer (the corresponding tool is not included).
L
NOTE
Make sure the wall is flat and straight.
2. Loosen the nut of the anchor bolt (
361
) until it is flush with the end of the bolt.
3. Carefully hammer the anchor bolts ( 361 ) into the pre-drilled holes and remove the nuts
completely.
4. Slide the wall mouting bracket (
034
) over the anchor bolts and screw the nuts back onto the
anchor bolts.
5. Tighten the nuts of the anchor bolts.