1
2-1
3
4
5
6
2-2
2-3
2-4
1
1
Inside hexagon bolt M8*20 + washer
4
2-1
Expansion bolt
6
2-2
Washer 10
6
2-3
Spring washer 10
6
2-4
Lo nut Mck 10
6
3
Left frame
1
4
Right frame
1
5
Long handle
2
6
Short handle
2
3
ASSEMBLY
1. Insert the short handle (6) into the left frame (3).
2. Assemble the long handle (5) to the left frame (3) with two bolts and
washers (1).
3. Repeat these steps for the right frame (4).
Wall Assembly
࣑
ATTENTION
The supplied assembly material for wall mounting is not suitable for
every wall. Pay attention to the condition of your wall to determine
which assembly material is suitable for your wall.
The contractual partner accepts no liability for any damage to the wall.
Make sure that there are no cables or wires running in the wall where
you attach the training equipment.
L
NOTICE
The supplied assembly material is not suitable for every wall, so you
may need to get assembly material that is suitable for your wall.
4
PARTS LIST
5
CARE, MAINTENANCE AND STORAGE
⚠
WARNING
The storage location should be chosen so that improper use by third
parties or children can be prevented.
1. Clean the device with a dry soft cloth.
2. Store the device in the supplied carton in a dry environment.
6
WARRANTY INFORMATION
Training equipment from Taurus® is subject to strict quality control.
However, if a fitness equipment purchased from us does not work
perfectly, we take it very seriously and ask you to contact our customer
service as indicated. We are happy to help you by phone via our service
hotline.
Warranty period
The warranty periods, shown on our web shop, begin on delivery
of the fitness equipment. The respective warranty periods for your
equipment can be found on its product website.
Please refer to the website of your Taurus® device for the exact warranty
conditions.
Contact
DE
Technical Support
📞
+49 4621 4210-900
📧
Service
📞
0800 20 20 277
(freecall)
📧
UK
Technical Support
📞
+44 141 876 3986
📧
Service
📞
+44 141 876 3972
FR
Technical Support & Service
📞
+33 (0) 172 770033
+49 4621 4210-933
📧
DK
Technical Support & Service
📞
80 90 16 50
+49 4621 4210-945
📧
INT
Technical Support & Service
📞
+49 4621 4210-944
📧
BE
Technical Support & Service
📞
02 732 46 77
+49 4621 42 10-932
📧
NL
Technical Support & Service
📞
+31 172 619961
📧
AT
Technical Support & Service
📞
0800 20 20 277
(freecall)
+49 4621 42 10-0
📧
CH
Technical Support & Service
📞
0800 202 027
+49 4621 42 10-0
📧
PL
Technical Support & Service
📞
22 307 43 21
+49 4621 42 10-948
📧
No.
Name
Qty.
1. Drill a hole with a minumum depth of 80mm.
2. Insert the expansion screw (with cover) into the
hole.
3. Tighten the nut, causing the bolt to unscrew and
the inside to spread and fix itself into the wall.
4. Unscrew the nut.
5. Slide the wall support on the bolt and fix it with
the previously unscrewd nut.
