After Sales Support
TEL:
07 3188 2025
WEB:
helpdesk
@
duons
.
com
.
au
9
Bench Grinder
After Sales Support
TEL:
07 3188 2025
WEB:
helpdesk
@
duons
.
com
.
au
Fit the tool rest as shown in Fig. C.(page 12)
•
Fix it as tightly as possible in position, with a maximum clearance (C) of 1 to 1.5 mm
•
between the tool rest and the grinding wheel.
replacing the grinding wheel
Fig. D (page 12)
Required tools:
19 mm spanner
•
8 mm spanner
•
Screwdriver
•
Only ever replace the grinding wheel when the motor is at a standstill and the power is
completely disconnected.
Remove the grinding wheel guards using the tools listed above. The spindle nut on the
•
right-hand side has a right-handed thread. The spindle nut on the left-hand side has a left-
handed thread. Keep this in mind when you are replacing the grinding wheels.
Loosen the nut using the correct spanner. Remove the old wheel from the spindle.
•
Clean the flanges. Place one flange (A) back on the spindle, with the hollow side facing the
•
grinding wheel. Slide the new wheel onto the spindle. Place the second flange (A) on the
spindle, again with the hollow side facing the grinding wheel. Now tighten the nut on the
spindle. Do not overtighten! Now refit the grinding wheel cover, and again adjust the tool
rest correctly. Run the motor briefly, without grinding.
ASSemBly And SPAre PArtS
Spare parts list
Position
description
no.
2 - 8
Protection glass + holder assy
706096
18
Flange
706097
21
Nut
706098
24 - 28
Toolrest right
706099
26 - 28 + 24 + 45
Toolrest left
706100
31
Switch
706101
39
Capacitor
706102
BGM6018 Ma 1109-26.indd 9
9/26/11 10:56:03 AM
