Taurus - USB User Guide
The aluminium
stand does not
have to be
removed for drive
assembly.
Changing the
JBOD setting will
require you to re-
format the drives.
Chapter 2 - Hard Drive Assembly
Your unit may come with pre-installed hard drives. Before
opening such an enclosure, please read the warranty from
your vendor carefully, as this could void your warranty.
1. Remove the four screws from the bottom of the case.
2. Push the inner enclosure out, and remove the outer chassis.
3. For JBOD (2 drives become 1), remove the jumper at J1.
4. Install the first hard drive, connect the cables and mount it
with two screws on each side.
Page 4 / Chapter 2 - HDD Assembly