Power stage efficiency: 130Watt
Power output selector: 50W, 25W
Speakers impedance auto detection: 4,8 and 16ohm
2 channels: CLEAN i DRIVE
3- footswitches: REVERB, CLEAN-DRIVE and BOOST
CONTROLS:
BASS, RANGE switch, TREBLE, PRESENCE, DRIVE , DRIVE LEVEL,
REVERB, VOLUME
MASSIVE – sound saturation
SPEAKER CABINET SELECTOR: guitar cabinet / full range cabinet
BOOST increases output signal level and makes sound slightly "crunchy".
Serial EFFECT LOOP
LINE-OUT with Speaker Simulation.
Allows send linear signal with simulation (PIN) or without simulation (RING)
or both simultaneously
Main power suplply range: 90-240V
Housing dimensions: (H x W x D) 60 x 185 x 175 mm
Overall dimensions: (H x W x D) 78 x 185 x 175 mm
Weight: 1,35kg
Specification
Thank you for trust and choosing our amplifier.
In 2011, Taurus was the first that introduce to the amp's world a new type of a professional guitar
amplifier designed in a compact shape, especially dedicated for pedalboards.
Since then, eight different models of Stomp-Head have been produced under Taurus logo.
In the case of SH-8.Qube, our goal was to design an amplifier that has all features of tube amplifiers,
very functional and unlike classic amplifiers very light and as small as possible.
In the case of this amplifier, we made sure that it is not inferior to its tube version.We give guitarists
an amplifier with exceptionally small weight and dimensions but still with truly pro, powerful sound.
The actual volume and sonic character of amps based on Master Tube Design is exactly the same as
the traditional tube amplifiers of the same power.
In order to achieve the expected parameters, the amp is driven by a much higher power stage
amplifier.
Usable amp's power is 50 Watts, while the actual power of the power amp and power supply is 130
Watts. Preservation of greatest possible sound's headroom is one of the main reasons of the
difference between usable and actual power of the amp. Speakers with different resistance of 4, 8 or
16 ohms can be connected. The adjustment of the amplifier power to the speaker resistance is
automatic. No matter which resistance is used, the amp always play with full power of 50 Watts.
The amplifier is equipped with a unique feature that allows to connect both a guitar cabinet and a full-
range PA or Hi-Fi cabinet. The analog module with the SPEAKER CABINET SELECTOR switch is
used for this purpose.
SH8.Qlone can be used in various configurations:
- as a classic amplifier. There are 2 power levels to choose from: 25W and 50W.
- as a preamp connected directly to the mixer and PA system using the built-in speaker cabinet
simulation.
The amplifier can be used without connecting a speaker. If a speaker cabinet is not connected, the
power stage of the amp is not active.
