OPIS FUNKCJI
The Stomp−Head
is an ultralight, very compact floor amplifier with integrated footswitch, designed to
be set on the pedal board, along with effects or placed directly on the stage floor. It greatly benefits the
player with immediate access to all amp’s potentiometers and options. When the amp is set on a pedal
board only one wire (speaker wire) is needed to setup the guitar sound on stage. This amplifier can also be
placed on a top of a cabinet like a regular head.
The Stomp−Head 1.CL is an analog guitar amplifier design with class D power amp and SMPS (Switched−
Mode Power Supply).
These features determine extreme compact dimensions. The amp features two channels: CLEAN & LEAD
which are accessible by the foot switch mounted on the top of the chassis.
The dynamics, compression and nature of the distortion are exactly the same as in classic tube amps.
To obtain required parameters, the amplifier is driven by a much higher rated power amp. Even though
the power of the amplifier is set at 50Watts RMS, in reality the real power of the amp is 100 Watts.
The SH 1.CL is also equipped with a power selector allowing the player to use the amp in two different
power ratings of 50 and 25Watt RMS. It is also designed to auto adjust itself to different speakers
impedance. The amp handles the speakers with 4, 8, and 16 Ohm of impedance.
The Stomp−Head can also be used as a guitar preamp. LINE OUT with a Speaker Cabinet Simulation
permits the player to connect preamps independently to a mixer or an external power amp. The Speaker
Cabinet Simulation imitates the sound of the CELESTION Vintage 30 cabinet. The amp is also equipped with
a serial EFFECT LOOP.
Power output: 50 W / 4−8−16ohm
Power brake to 25Watt
Auto detection speakers impedance
2 channels: CLEAN and LEAD
FOOT SWITCH − channel CLEAN / channel LEAD
Clean controls:
BASS, MIDDLE, TREBLE, VOLUME
Lead controls:
DRIVE, BASS, MIDDLE, TREBLE, VOLUME
Serial effect loop
LINE OUTPUT with speaker simulation
Universal AC input range 90−260V/AC 50−60Hz
Dimensions: [H x W x D] 90 x 160 x 190 mm
Weight: 1,2kg
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
−
−
−
− LINE OUTPUT with speaker cabinet simulation
−
−
−
−
−
−
−
−
−
−
−
−
−
− A
. Range: 90−260V / 50−60Hz
−
INPUT
Effect−loop SEND
Effect−loop RETURN / PA input
Speakers output / impedance: 4−8−16ohm [auto detect. impedance]
DRIVE control / LEAD channel
BASS control / LEAD channel
MIDDLE control / LEAD channel
TREBLE control / LEAD channel
VOLUME control / LEAD channel
BASS control / CLEAN channel
MIDDLE control / CLEAN channel
TREBLE control / CLEAN channel
VOLUME control / CLEAN channel
Power selector 50Watt/25Watt
LED indicator of the selected channel
C POWER input
POWER on/off switch
CLEAN / LEAD foot−switch
Signal can be lead in different ways: with simulation, without simulation or both − see Fig.A.
SPECIFICATIONS
1
2
3
4
5
DRIVE
INPUT
SEND
RETURN
LINE OUT
SPEAKER
4-16ohm
EFX
EFX
BASS
TREBLE
VOLUME
MIDDLE
5
4
3
2
1
6
7
8
5
4
3
2
1
6
7
8
1
1
2
3
4
2
3
4
1
1
2
3
4
2
3
4
1
1
2
3
4
2
3
4
BASS
TREBLE
VOLUME
MIDDLE
5
4
3
2
1
6
7
8
1
1
2
3
4
2
3
4
1
1
2
3
4
2
3
4
1
1
2
3
4
2
3
4
25W
C
H
ANNE
L
Stomp-Head
50W
6
7
8
9
10
14
13
12
11
18
19
16
17
15
100W/rms power stage INSIDE
