Taurus SESS7139, Руководство по сборке и эксплуатации

Страница: 20 / 44

20
Squat/Calf Machine
Step 5: Assembly of the Pulleys and Cable Routing
L
NOTICE
+ The majority of the pulleys are pre-assembled when delivered. These pulleys need to be
disassembled in order to perform the cable routing.
+ The two pulleys (012 and 013) for the frame are not pre-assembled.
1. Route the cable (50) over the pulley set (013) and assemble the pulley set (013) to the upper side
of the frame (001) and pulley baffle (004) with the pre-assembled screw (026), two flat washers
(031) and one nut (034-1).
2. Route the cable (50) down and under the pulley set (012) and assemble the pulley set (012) to
the lower side of the frame (001) with the pre-assembled screw (025), two flat washers (031)
and one nut (034-1).
3. Disassemble pulley (62) in
location A, route the cable (50)
around and reassemble the
pulley (62).
4. Disassemble pulley (62) in
location B, route the cable (50)
around and reassemble the
pulley (62).
5. Disassemble pulley (62) in
location C, route the cable (50)
around and reassemble the
pulley (62).
6. Disassemble pulley (62) in
location D, route the cable (50)
around and reassemble the
pulley (62).
7. Disassemble pulley (62) in
location E, route the cable (50)
around and reassemble the
pulley (62).
8. Attach the lower cable end (50)
to the floor stander (36-2).