Taurus RUN X, Руководство по сборке и эксплуатации

Страница: 13 / 36

RUN X
13
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
+ First loosely screw all parts together and check that they fit properly. Tighten the screws
using the tool only when you are instructed to do so.
+ If you have difficulty recognising the graphics, we recommend that you open and/or
download the PDF instructions stored in the webshop on your end device (e.g. smartphone,
tablet or PC). There you have the option of zooming in closer. Please note that the Adobe
Acrobat Reader programme must be installed on your end device in order to open the file.
Step 1: Mounting the console
1. Connect the cable of the console (55) with the corresponding counterpart of the console frame (4).
࣑
ATTENTION
Be careful not to pinch the cables in the following step.
2. Fasten the console (55) to the console frame (4) with four M5*10 screws (83).
Step 2: Mounting the Console Masts
1. Connect the cables of the right
upright post (2) with the cables of
the main frame (1).
࣑
ATTENTION
Be careful not to pinch the cables
in the following step.
2. Fix the two upright posts (2 & 3)
to the main frame (1) with four
M8*55*20 bolts (78) each.