Taurus RB9.9, Руководство по сборке и эксплуатации

Страница: 22 / 52

RB9.9
22
Step 6: Mounting the covers and pedals
1. Mount the seat (69) on the main frame (1) with four screws (112) and four washers (16).
2. Screw the left pedal (51L) to the left crank (48L) by turning the pedal (51L) counterclockwise.
3. Screw the right pedal (51R) to the right crank (48R) by turning the pedal (51R) clockwise.
4. Place the front and rear covers (5) on the front and rear stabilisers (4 & 2) and mount each cover
(5) with three screws (39).
5. Place the covers (114 & 115) under the backrest (119) and mount each cover (114 & 115) with
one screw (38) and two scres (39).
6. Now hand tighten all screws.
Step 7: Connecting the equipment to the mains supply
࣑ ATTENTION
The equipment must not be connected to a power board, otherwise it cannot be guaranteed
that the equipment will be supplied with sufficient power. Technical errors can result.
Connect the power cable (66) to the unit and then plug the power cable (66) into a wall socket that
complies with the specifications in the chapter on electrical safety.