Taurus Pro TF-RK6102, Руководство по сборке

Страница: 13 / 28

13
Step 1: Assembly of the Main Base and Supports
1. Attach one rubber stand (19) to each main base (1) and rear support (2).
2. Attach one rear support (2) along with one plate (10) to one main base (1) with two bolts (13),
four washers (15) and two nuts (17).
3. Attach one front support (3) along with one plate (10) to the main base (1) with two bolts (13),
four washers (15) and two nuts (17).
4. Attach the same front support (3) to the rear support (2) with two bolts (12), four washers (15)
and two nuts (17).
5. Repeat the steps 2-4 on the other side.
6. Connect the frames with the joint support (4) and two plate bars (8) with a total of four bolts
(11), eight washers (15) and four nuts (17).