Taurus Pro Seated Leg Extension, Руководство по сборке и эксплуатации

Страница: 21 / 40

21
4 TROUBLESHOOTING, CARE AND MAINTENANCE
4.1 General Instructions
⚠
WARNING
+ Do not make any improper changes to the equipment.
⚠ CAUTION
+ Damaged or worn components may affect your safety and the life of the equipment. Safety
can only be guaranteed if you check the equipment regularly for wear and damage. Replace
damaged or worn components immediately. In such a case, contact the contract partner.
The equipment must not be used until it has been repaired. If necessary, use only original
spare parts.
࣑
ATTENTION
+ In addition to the instructions and recommendations for maintenance and care given here,
additional service and/or repair work may be necessary; this must only be carried out by
authorised service technicians.
4.2 Faults and Fault Diagnosis
The equipment undergoes regular quality controls during production. Nevertheless, faults or
malfunctions may occur. Frequently, individual parts are responsible for these disturbances, an
exchange is usually sufficient. Please refer to the following overview for the most common errors and
how to correct them. If the equipment still does not function properly, contact your contract partner.
Fault Cause Solution
Squeaking & cracking
noises
Screw connections loosened
or too tight
+ Check or lubricate screw
connections*
Unit wobbles
+ Uneven ground
+ Loose screw connections
+ Align unit
+ Tighten screw connections
* With a grease-free silicone oil or silicone spray.