Taurus Mini Super-S System Setup
Page 5
5. Slide the HDD tray(s) back into the case and push it lightly into place.
6. Align the rear panel with the case and fasten the hand-tightening screws to finish the
assembly.
7. Turn on the power and use the LCD display to set your preferred RAID mode.
8. Connect the device to your computer. For PC users, use the disk management tool or for
Mac users, use the disk utility to create a new partition and format the drives.
9. Done! Your drive is now ready to use.
Note
This device is designed for two hard drives and does not work when only one HDD is installed.
Important
Upon initial start up of the device and when changing the RAID mode, any existing data on the
installed hard drives will be erased. Please make sure you backup all data prior to installing
the hard drives and prior to changing the RAID mode!
